Entry systems

Manual and
electric ramps

Individually adjustable:
Manual folding ramp HK Modular

The manual folding ramp HK Modular is easy to adjust to users' individual requirements. It has a load capacity of 350 kilograms and as an integrated ramp is a component of the vehicle floor.  

  • Weight: 28.5 kg (depending on ramp length)
  • Load capacity: 350 kg
  • Tread plate size: Length in accordance with ECE R107 and DDA B ≥ 800 mm
  • integrated ramp (component of the vehicle floor with general floor surface)
  • Ramp and floor pan as a complete module made of aluminum and stainless steel
  • Designed in accordance with EG 2001/85, ECE R107, and DDA

Simply clever:
Electric Ramp IL 2502

Electric Ramp IL 2502 Weighing 36.3 kg, this ramp is lightweight yet walkable and can be extended or retracted in just 8 seconds. The LED flashing light provides additional safety.

  • Weight: 36.3 kg
  • Load capacity: 350 kg
  • Installation size: L 875.5 mm × W 970 mm × H 75.5 mm
  • Extension and retraction time: 8 seconds
  • Ramp floor plate: walkable
  • Impact edge and step detection sensors in accordance with EG 2001/85, ECE R107, and DDA
  • Blinking LED lights as additional safety feature
  • Error code analysis through blink code using intelligent control system
  • Also available with a 1000 mm wide tread plate

Ramp system
DualFold Ramp

Our electric "DualFold Ramp," a folding ramp for height differences up to 16" (406.4 mm), can be manually operated with a hand force of less than 9 kg if needed. It features obstacle detection through motor current monitoring, flat transitions with a height of ≥12 mm, and a robust and corrosion-resistant stainless steel construction.

  • Weight: ~96.5 kg / 213 lbs
  • Load capacity: Up to 350 kg / 770 lbs
  • Operating voltage: 24V
  • Temperature range: -40°C to +50°C
  • Folding/unfolding time: ~10 seconds
  • Dimensions (retracted): L 1270 mm x W 965 mm x H 88 mm (LxWxH) 1300 x 965 x 125 (mm)
  • Dimensions (extended): L 2440 mm x W 965 mm x H 88 mm (LxWxH) 2440 x 965 x 125 (mm)
  • Tread plate length: 1240 mm / 48"
  • Usable width: 815 mm / 32"
  • ADA-compliant 1:6, 49CFR 38, installation in the entry area (1st door)

Its special feature:

  • The patented suspension system allows for super easy manual operation in the event of a power failure with less than 5 kg / 11 lbs of force
  • Silent operation with “Soft Close & Open”
  • Curb and obstacle detection through motor power monitoring
  • Easy access to the low-maintenance ramp system
  • Maximum entry height 16” / 406 mm 
Your contact

Florian Klotz

Sales Ramps & Lifts
Tel. +49 561 998 2082
florian.klotz(@)hubner-group.com